Wall Mounted LPG Regulators Consumer Safety Reset OPSO Low pressure 37mb regulators with CSR OPSO Reset 4kg/h (56kW)
The ‘LP Gas circuit breaker’
Low pressure Wall Mounted regulators fitted with the latest Consumer Safety protection system required by the UK standards to cover all fixed pipework installations.
Ideal for all types of LPG cylinder applications. Domestic, Commercial, Catering, Inland waterways, Holiday and Park Homes.
Clesse CSR 485 Wall Mounted Regulator including Consumer Safety Reset (CSR) Over Pressure Shut Off (OPSO*) system.
New LPG safety system developed by Clesse enables the consumer to reset the regulator should the gas pressure exceed recommended limits, protecting appliances and property. Clear visible indication and resetting is performed by a “Push to reset” system, similar to electrical consumer RCD protection.
*OPSO is a recommendation under the new 2013 edition HSE L56 Approved Code of Practice and Guidance, and a requirement of BS 6891 Annex E covering LP Gas fixed pipework installations in the UK.
Single Cylinder kit supplied with an angled inlet connection and Testpoint on the outlet. Supplied on a universal bracket for wall mounting with a single pigtail for connection to a single Cylinder.
Manual Changeover kit supplied with a directional control Valve head to use a single cylinder either side of the regulator including Testpoint and Ball Valve on the outlet. Supplied on a universal bracket for wall mounting with 2 Cylinder connection Pigtails.
Dual Cylinder kit supplied with independently operating valve head specially designed to allow one or both cylinder banks to be used simultaneously for high gas offtake rates i.e. commercial appliances and applications. Ballvalve and Testpoint included on the outlet. Supplied on a universal bracket for wall mounting with 2 Cylinder connection Pigtails.
Four Cylinder kit requires additional Clesse upgrade kit and is recommended when installation capacity exceeds 32kW